DLP series
Through-feed presses from Joos
Today, efficient veneer application demands industry-leading quality and quantity capacity. Joos through-feed presses fulfill all requirements for inexpensive, economical, and environmentally-friendly machinery. Joos through-feed presses stand out for their solid construction and well-designed technology. By using standardized components, we guarantee simple and reliable operation and a long-lasting product. Joos through-feed presses are manufactured both as series machines and in customer-specific designs.
Overview
- Joos A.B.S. safety system
- Gold anodized heating plates
- Dynamic piston mounting
- Integrated PLC controller
- Heating options: electric, hot water, thermal oil
- Quick exchange system for film tensioning
- Electronic temperature control systems
- Thermal coupling to the building heating system
- Suitable for production lines
- System feeding from the narrow or wide side
DLP: environmentally-friendly and economical presses.
High-quality machines with a long service life.
Rotating pressing belt
The specialized table design allows the conveyor belts to be routed around the heating plate inside the press, protecting them from contamination and damage. The belt length is identical to the dimensions of the press surface.
1 of 5Film tensioning
The film is tensioned above the top heating plate to protect it against contamination and wear. The film is tensioned using a quick exchange system, and can be replaced with little effort.
2 of 5ABS
Parts that are placed incorrectly or not picked up are immediately registered by microsensors, and the press opens again automatically. This avoids the expensive consequences of damage to the press table, hydraulic system, and/or heating plates.
3 of 5Piston mounting
The press table is placed dynamically on the pistons, without screw fitting. The table is guided by a column guide. A precision rack parallel guide ensures even running.
4 of 5Management
The system is operated via the easy to use operating panel and operating elements. The switch cabinet with integrated PLC controller is mounted on the back of the press.
5 of 5DLP series models
DLP 100/OK
-
Pressing force 1000 kN
-
Press surface area 2550x1350 mm
-
Pressing room height 200 mm
-
Spec. pressure with full design 2,9 kg/cm²
-
Operating pressure 315 bar
-
Number of cylinders 4x90 mm
-
Operating temperature 130 °C
-
Operating voltage 400 V
-
Feeding width 2500 / 1350 mm
-
Feeding table 2550x1350 mm
-
Discharge roller conveyor 2550x1350 mm
-
Weight 8600 kg
DLP 120/OK
-
Pressing force 1200 kN
-
Press surface area 3150x1350 mm
-
Pressing room height 200 mm
-
Spec. pressure with full design 2,8 kg/cm²
-
Operating pressure 270 bar
-
Number of cylinders 6x90 mm
-
Operating temperature 130 °C
-
Operating voltage 400 V
-
Feeding width 3150 / 1350 mm
-
Feeding table 3150x1350 mm
-
Discharge roller conveyor 1350x1350 mm
-
Weight 10200 kg
DLP 150/OK
-
Pressing force 1500 kN
-
Press surface area 3150x1600 mm
-
Pressing room height 200 mm
-
Spec. pressure with full design 3,0 kg/cm²
-
Operating pressure 340 bar
-
Number of cylinders 6x90 mm
-
Operating temperature 130 °C
-
Operating voltage 400 V
-
Feeding width 3150 / 1600 mm
-
Feeding table 3150x16000 mm
-
Discharge roller conveyor 3150x1600 mm
-
Weight 11800 kg
DLP 200/OK
-
Pressing force 2000 kN
-
Press surface area 3800x1600 mm
-
Pressing room height 200 mm
-
Spec. pressure with full design 3,3 kg/cm²
-
Operating pressure 350 bar
-
Number of cylinders 8x90 mm
-
Operating temperature 130 °C
-
Operating voltage 400 V
-
Feeding width 1600 mm
-
Feeding table 3800x1600 mm
-
Discharge roller conveyor 3800x1600 mm
-
Weight 15300 kg
Special sizes upon request
SET UP A CONSULTATION APPOINTMENT
We would be glad to offer you a thorough and non-binding consultation on our presses. Make your appointment now.
REQUEST AN OFFER
We would be glad to prepare a non-binding offer for you for one of our high-quality, high-performing presses.